Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

A Prediction of Quenching Parameters Using Inverse Analysis (CROSBI ID 207144)

Prilog u časopisu | izvorni znanstveni rad | međunarodna recenzija

Landek, Darko ; Župan, Josip ; Filetin, Tomislav A Prediction of Quenching Parameters Using Inverse Analysis // Materials performance and characterization, 3 (2014), 4; doi: 10.1520/MPC20130109

Podaci o odgovornosti

Landek, Darko ; Župan, Josip ; Filetin, Tomislav

engleski

A Prediction of Quenching Parameters Using Inverse Analysis

The cooling curves of still water and of water- based polymer quenchant polyalkylene glycol (PAG) were recorded with the ISO Inconel 600 probe with 12.5 diameter and 60 mm length equipped with a type K thermocouple inserted into the probe's geometric center. The research included recording of cooling curves for still water in temperature range from 20 to 60°C, as well as quenching experiments with water based polymer solutions with concentration from 10 to 30 vol. % of PAG. The possibility of a new cooling curve determination method for any given water temperature based on interpolation model and experimental data for cooling curves at three different water temperatures was tested. Surface temperature, heat flux density, and heat transfer coefficient (HTC) were estimated based on the recorded cooling curve at the center of the ISO Inconel 600 probe using the solutions of inverse heat conduction problem (IHCP). The results of the inverse heat transfer analysis of the ISO Inconel 600 probe cooling in water and water based polymer solutions were compared to the results of the commercial software ivf SQintegra ver4.0 for the same cooling experiments. The proposed inverse determination of HTC can be used for the specification of boundary conditions in numerical simulations of quenching axisymmetric work pieces with similar dimensions to the ISO Inconel 600 probe.

quenching; cooling curve analysis; inverse heat transfer analysis; water-based polymer quenchant PAG; ISO 9950

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o izdanju

3 (4)

2014.

objavljeno

2165-3992

10.1520/MPC20130109

Povezanost rada

Strojarstvo

Poveznice
Indeksiranost