Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi

Cylindrical particle modelling in pulverized coal and biomass co-firing process (CROSBI ID 214471)

Prilog u časopisu | izvorni znanstveni rad | međunarodna recenzija

Bonefačić, Igor ; Franković, Bernard ; Kazagić, Anes Cylindrical particle modelling in pulverized coal and biomass co-firing process // Applied thermal engineering, 78 (2015), 74-81. doi: 10.1016/j.applthermaleng.2014.12.047

Podaci o odgovornosti

Bonefačić, Igor ; Franković, Bernard ; Kazagić, Anes

engleski

Cylindrical particle modelling in pulverized coal and biomass co-firing process

Numerical analysis of co-firing pulverized coal and biomass in a vertical cylindrical laboratory furnace is explored. The ratio of coal and biomass in the fuel was 80:20 by mass for all cases. The mathematical model of combustion in the furnace was established by describing physical phenomena such as turbulent flow, heat and mass transfer, devolatilization and combustion. A 3D-model of combustion in a laboratory furnace was created using the CFD software FLUENT. The shape of the biomass particles was estimated as cylindrical and was accounted for in the calculation of particle trajectories via a custom-developed model. Experimental measurements were conducted on a 20 kW laboratory furnace with controllable wall temperature. The temperature varied in the range from 1233 K to 1823 K, depending on the case. Excess air for combustion was set at 10% or 20%, depending on the case. The developed model shows better agreement with the experimental data than the existing models, which estimate particles as spheres. Analysis of the results shows that the influence of the particle size increases with the size of the particle. Also, the geometry of the cylindrical particles strongly influences the beginning and the intensity of the devolatilization process and subsequently the combustion process.

Pulverized combustion; biomass; particle shape; heat transfer; mass transfer; numerical model

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o izdanju

78

2015.

74-81

objavljeno

1359-4311

10.1016/j.applthermaleng.2014.12.047

Povezanost rada

Strojarstvo, Temeljne tehničke znanosti

Poveznice
Indeksiranost