Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi

The impact of tribocorrosion on wear of work parts of the screw press (CROSBI ID 242424)

Prilog u časopisu | izvorni znanstveni rad

Opačak, Ivan ; Putnik, Ivan ; Šakić, Dejan ; Marušić, Vlatko The impact of tribocorrosion on wear of work parts of the screw press // Machines, Technologies, Materials, 11 (2017), 6; 323-326

Podaci o odgovornosti

Opačak, Ivan ; Putnik, Ivan ; Šakić, Dejan ; Marušić, Vlatko

engleski

The impact of tribocorrosion on wear of work parts of the screw press

In the production of oil in the oil mill parts of the equipment wear due to contact with seeds which contain microabrasive particles. This wear manifests itself by changing the dimensions and geometry of the screw press. The paper analyzes the influence of tribo-corrosive wear on the workpieces of the screw press. The appearance of wear is most likely due to the action of aggressive media, in this case the oilseeds. In the experimental part of this paper, on samples made of cast steel and austenistic stainless steel, following laboratory tests were performed: electrochemical testing, testing of chemical composition of the base material, wear analysis, microstructure recording and hardness testing. Based on the laboratory testing, conclusion was that the austenistic stainless steels 304L and 316L with nitrated surfaces exhibit better resistance to tribo-corrosion wear in relation to cast steel GS-42CrMo4.

tribocorrosion ; electrochemical testing ; wear ; screw press

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o izdanju

11 (6)

2017.

323-326

objavljeno

1313-0226

1314-507X

Povezanost rada

Strojarstvo