Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

Determination of Service Life of Sintered Powder Metallurgy Gears in Regard to Tooth Bending Fatigue (CROSBI ID 248884)

Prilog u časopisu | izvorni znanstveni rad

Glodež, Srečko ; Šori, Marko ; Vučković, Krešimir ; Risović, Stjepan Determination of Service Life of Sintered Powder Metallurgy Gears in Regard to Tooth Bending Fatigue // Croatian journal of forest engineering, 39 (2018), 1; 129-137

Podaci o odgovornosti

Glodež, Srečko ; Šori, Marko ; Vučković, Krešimir ; Risović, Stjepan

engleski

Determination of Service Life of Sintered Powder Metallurgy Gears in Regard to Tooth Bending Fatigue

The aim of this study is to check the possibility of replacing the pinion gear made of struc- tural steel with the one made of sintered material. The pinion is part of the gear pair mounted in front of the gearbox of the skidder Ecotrac 55V to increase the speed and lower torque. In larger series, powder metallurgy (PM) gears are used as a cost-e ective alternative for wrought metal gears in a number of industries including the one producing forest products. The pres- ent paper discusses the computational and experimental approach for determining the service life of sintered PM gears in regard to tooth bending fatigue. The proposed computational model is based on the stress-life approach, where the stress eld in a gear tooth root is deter- mined numerically using nite element method. The needed material data have been taken from the authors’ previous work. Due to the sca ering nature of fatigue, the statistic approach has also been considered by presentation of computational results. The experimental procedure was done on a custom made back-to-back gear testing rig. The comparison between computa- tional and experimental results has shown that the proposed computational approach is an appropriate calculation method for estimating the service life of sintered gears regarding tooth root strength. Namely, it has been shown that, in case of proper heat treatment of tested gears, tooth breakage occurred in the interval with 95% probability of failure, which has been deter- mined using the proposed computational model.

skidder, service life, sintered powder metallurgy gears, tooth bending fatigue, stress- life approach, back-to-back test rig

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o izdanju

39 (1)

2018.

129-137

objavljeno

1845-5719

Povezanost rada

Strojarstvo, Šumarstvo

Poveznice
Indeksiranost